Climbing Net

Introduction: climb the net also known as an outer layer of steel net, commonly used in high-rise buildings around the site, especially to build more than 15 layer buildings most will adopt climbing frame nets, whole on the ground after installation of the erection, starts to climb up step by step, the workers in a closed up net internal space, prevent the dangerous person or object falling, greatly improving the security, an architectural safety protection network is an essential part of the 21st century.

About climb the net price: because of the climb the net material is metal, cost is higher than the traditional plastic safety net, but due to climb climb the net can be automatically, without the need for the whole building peripheral structures, climb on the net, so from that perspective, climb the net have to save money, other metals to climb in the net purchase, one can use a lot of times, reduces the use cost again.

Three, about the climbing frame network commonly used specifications:

First said punching plate mesh: 5 mm, 6 mm, 8 mm and other holes of different aperture, hole spacing has 4, 5, 6, and so on.Mesh generally used round hole.

Material: at present, the most commonly used is to use galvanized plate cut a hole, and then welded wire frame bracket, finally climb the surface of the frame for spray treatment, this is the most economical and durable material.

Color: the most commonly used is blue, followed by green and yellow.

Overall size: 1m*2m 1.5m*1.8m *2m, etc.

Thickness: 0.5mm-1.2mm.

What are the advantages and disadvantages of climbing grid?

1. Advantages of scaffolding network: material saving, low carbon environmental protection;Save labor, manpower and material resources and time;Strong independence;Shortened the duration of the whole project;High security;Overall appearance neat and beautiful, is a unique landscape of future urban construction;Good closure;Good fire prevention;Product standardization enables rapid installation and removal;Noise reduction, civilized construction and so on.

2. Disadvantages of climbing net:

(1) it is not suitable for high-rise residential buildings with too many concave and convex plane shapes and complicated advance and retreat.This plane shape needs too many segments, which requires more lifting power points. It is not easy to solve the problem of synchronous and orderly rising of too many lifting power points.

(2) each lifting power point has a large load acting on the eave beam and balcony cover beam of the house, which shall be calculated by the structural designer and strengthened in advance, and embedded parts shall be set.